{"title":"ARM (STM32) Microcontroller Kits","description":"\u003cp\u003e\u003ccode\u003eLearn embedded programming and circuit building with STM32 ARM microcontroller kits, development boards and programming tools. Choose from beginner through advanced STM32F0 kits, interface boards, ST-Link programmers and learning resources.\u003c\/code\u003e\u003c\/p\u003e","products":[{"product_id":"newbiehack-development_tools-prototyping-microcontroller-usb-arm-programmer-stlinkv2-stm32-stm8","title":"ST Link v2 Programmer for STM32 and STM8 Microcontrollers","description":"How do you cram a program into an ARM microcontroller? This is how! Use this ST Link programmer to transfer firmware into the STM32 or STM8 microcontrollers.    Use this device to send program code to the 32-bit STM32 ARM Cortex or 8-bit STM8 microcontrollers.    The header for this ST-Link v2 programmer contains connections for 5V, 3.3V, SWCLK, SWDIO, SWIM, Reset (RST\/NRST) and GND. The connector on the opposite side of this device is a USB connector and is intended to be plugged into the computer.    The driver to support this device is located \u003ca href=\"http:\/\/www.st.com\/web\/en\/catalog\/tools\/PF251168\" rel=\"no-follow\"\u003ehere\u003c\/a\u003e.","brand":"BuildYourCNC","offers":[{"title":"ST-Link v2 STM32 and STM8 Programmer","offer_id":45875877740718,"sku":"2005-LP105","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/IMG_9703-800.jpg?v=1730085521"},{"product_id":"newbiehack-microcontroller-arm-stmicro-stm32f0r6-withbreadboardinterface","title":"STM32 Microcontroller and Interface Board","description":"\u003cp\u003eThis is an ARM Cortex-M0 microcontroller\/processor and an interface card that plugs into a breadboard for direct prototyping. Get started with ARM embedded programming. The configuration of the main board with headers will fit on three breadboards enabling a vast array of tie strips for use in prototyping. The headers for the board are not soldered. This particular ARM processor has the following specifications: 32-bit of data bus width, maximum clock frequency of 48 MHz, 64 kB of Program Memory, 8 kB of RAM (SRAM), Analog to Digital precision is 12-bits, will accept voltages of 2.4v to 3.3v (3.3 volts is typical), package of the processor itself is 64 LQFP (Low profile Quad Flat Pack), 16 analog to digital channels, contains 55 I\/O pins and 7 timers.\u003c\/p\u003e","brand":"BuildYourCNC","offers":[{"title":"STM32 M0 MCU and Interface to Breadboard","offer_id":45875877773486,"sku":"2003","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/IMG_9724-800.jpg?v=1745716413"},{"product_id":"newbiehack-microcontroller-arm-stmicro-stm32f0r6-ultra-basic-kit","title":"STM32 ARM Microcontroller Ultra Basic Kit","description":"\u003cdiv style=\"border:2px solid #2c5282;border-radius:8px;padding:16px;margin-bottom:24px;background:#f7fafc;\"\u003e\n\u003ch4 style=\"margin-top:0;color:#2c5282;\"\u003eWant the full ARM development experience?\u003c\/h4\u003e\n\u003cp style=\"margin-bottom:0;\"\u003eThe \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook\"\u003e\u003cstrong\u003eARM Advanced Kit (STM32F0)\u003c\/strong\u003e\u003c\/a\u003e includes everything you need for serious STM32 development — OLED display, 20x4 character LCD, ADXL345 accelerometer, ultrasonic range finder, FTDI USB-to-serial converter, and the complete passive component set for circuits using PWM, UART, SPI, and I2C. Most builders upgrade to it within weeks anyway. Save by starting with the kit that has everything.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe bare-essentials STM32 starter — for builders who already have a parts bin and just need the chip, the programmer, and a breadboard setup that doesn't fight them.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit gets you straight to the point: an ARM Cortex-M0 STM32F030 processor mounted on a breakout board, three breadboards configured for nine-tie-point pin access, and an ST-Link V2 programmer to flash firmware onto the chip. That's it. No LEDs, no resistors, no jumper wires — because if you're buying this kit, you already have those.\u003c\/p\u003e\n\n\u003ch3\u003eWho this kit is for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineers and hobbyists with a fully stocked electronics bench who don't need another bag of resistors\u003c\/li\u003e\n  \u003cli\u003eArduino veterans transitioning to ARM who already own breadboards' worth of components\u003c\/li\u003e\n  \u003cli\u003eRepair shops and prototyping labs needing a clean, low-cost STM32 platform\u003c\/li\u003e\n  \u003cli\u003eAnyone who wants the lowest-cost path into STM32 development without paying for components they already have\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eIf you don't have a parts bin already, the \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-beginners-kit\"\u003eARM Beginners Kit\u003c\/a\u003e is a better starting point — it includes the same chip, programmer, and breadboards plus all the passive components you'll need to actually build a circuit.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eThe breakout board advantage\u003c\/h3\u003e\n\u003cp\u003eThe included STM32F030 development board is mounted across three breadboards in a configuration that gives every microcontroller pin \u003cstrong\u003enine separate tie-point connections\u003c\/strong\u003e — four on one tie strip and five on the other. That means more room to wire complex circuits without daisy-chaining jumpers, and a much cleaner prototyping experience compared to standard dev kits.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eARM Cortex-M0 STM32F030 processor mounted on a breakout board\u003c\/li\u003e\n  \u003cli\u003e(3) Solderless breadboards (configured for 9-tie-point pin access)\u003c\/li\u003e\n  \u003cli\u003eST-Link V2 programmer\u003c\/li\u003e\n  \u003cli\u003eConnection cable for the ST-Link V2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSTM32F030 specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArchitecture:\u003c\/strong\u003e ARM Cortex-M0 (32-bit data bus)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum clock frequency:\u003c\/strong\u003e 48 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProgram memory:\u003c\/strong\u003e 64 KB Flash\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRAM:\u003c\/strong\u003e 8 KB SRAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eI\/O pins:\u003c\/strong\u003e 55 GPIO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTimers:\u003c\/strong\u003e 7 hardware timers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eADC:\u003c\/strong\u003e 12-bit precision, 16 channels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating voltage:\u003c\/strong\u003e 2.4V to 3.6V (3.3V typical)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage:\u003c\/strong\u003e 64 LQFP (Low Profile Quad Flat Pack)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCommunication peripherals:\u003c\/strong\u003e UART\/USART, SPI, I2C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you'll need to supply\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eResistors, capacitors, LEDs, jumper wires, and any other passive components for your circuits\u003c\/li\u003e\n  \u003cli\u003eA computer (Windows, Mac, or Linux) for programming the STM32\u003c\/li\u003e\n  \u003cli\u003eSTM32CubeIDE or your preferred ARM toolchain (free, downloaded from STMicroelectronics)\u003c\/li\u003e\n  \u003cli\u003eUSB cable for the ST-Link V2 (some computers may require a USB-A to USB-Micro adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFree YouTube tutorials\u003c\/h3\u003e\n\u003cp\u003ePatrick Hood-Daniel — the designer of this kit and author of \u003cem\u003eARM Microcontrollers: Programming and Circuit Building, Volume 1\u003c\/em\u003e — has a full library of free STM32 tutorials on YouTube using the same components found in our larger kits. Watch the lessons, follow along with your own components, and learn from the same person who designed the breakout board you're holding. \u003ca href=\"https:\/\/www.youtube.com\/@PatrickHoodDaniel\"\u003eSubscribe to the channel here.\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFree tutorial library\u003c\/h3\u003e\n\u003cp\u003eHundreds of additional STM32 tutorials, code examples, and project walkthroughs are available on our companion site, \u003ca href=\"https:\/\/newbiehack.com\"\u003eNewbieHack.com\u003c\/a\u003e. Topics include GPIO, timers and PWM, interrupts, UART\/SPI\/I2C, ADC, low-power modes, and driving stepper motors directly from the STM32.\u003c\/p\u003e\n\n\u003ch3\u003eFree customer support included\u003c\/h3\u003e\n\u003cp\u003eEvery kit purchase includes free support on what you've purchased. Stuck on getting the ST-Link to recognize the chip, configuring your toolchain, or wiring your first circuit? Reply to your order email and we'll help you get unstuck.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: How is this different from the Beginners Kit?\u003c\/strong\u003e\u003cbr\u003e\nThe \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-beginners-kit\"\u003eBeginners Kit\u003c\/a\u003e includes everything in this kit plus resistors, push buttons, LEDs, capacitors, and a 140-piece jumper wire set. If you don't already have those components on hand, the Beginners Kit is the better starting point — the price difference is much less than buying those parts separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Can I use this kit with components from my Arduino projects?\u003c\/strong\u003e\u003cbr\u003e\nYes — most through-hole components used in Arduino projects (resistors, capacitors, LEDs, jumper wires, push buttons, sensors, displays) work fine with the STM32. The main difference is operating voltage — the STM32F030 runs at 3.3V, so 5V-only modules may need a level shifter or voltage divider.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is the ST-Link V2 a clone or genuine?\u003c\/strong\u003e\u003cbr\u003e\nWe ship the standard ST-Link V2 programmer that's universally compatible with STM32CubeIDE and OpenOCD. It works identically to the genuine ST-branded unit for all standard STM32 development.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: What software do I need?\u003c\/strong\u003e\u003cbr\u003e\nSTM32CubeIDE is the official free IDE from STMicroelectronics and is what we use throughout our tutorials. Available on Windows, macOS, and Linux.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Why STM32 instead of Arduino?\u003c\/strong\u003e\u003cbr\u003e\nThe STM32F030 runs at higher clock speeds, has more peripheral options, more flexible interrupt handling, true hardware timers, and a much richer ecosystem for professional embedded work. If you're planning a career in embedded systems or want to design more sophisticated circuits, ARM is where the industry has gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Will the breakout board fit standard breadboards?\u003c\/strong\u003e\u003cbr\u003e\nYes — the breakout board is designed to span three standard solderless breadboards (included), giving every pin nine separate tie-point connections. It also works on individual breadboards if you only need access to a subset of the pins.\u003c\/p\u003e","brand":"BuildYourCNC","offers":[{"title":"STM32 Ultra Basic Kit","offer_id":45875877806254,"sku":"2004","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/IMG_9729-800.jpg?v=1730085530"},{"product_id":"newbiehack-microcontroller-arm-stmicro-stm32f0r6-beginners-kit","title":"ARM Microcontroller Beginners Kit (STM32F0)","description":"\u003cdiv style=\"border:2px solid #2c5282;border-radius:8px;padding:16px;margin-bottom:24px;background:#f7fafc;\"\u003e\n\u003ch4 style=\"margin-top:0;color:#2c5282;\"\u003eWant the full ARM development experience?\u003c\/h4\u003e\n\u003cp style=\"margin-bottom:0;\"\u003eThe \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook\"\u003e\u003cstrong\u003eARM Advanced Kit (STM32F0)\u003c\/strong\u003e\u003c\/a\u003e includes everything you need for serious STM32 development — OLED display, 20x4 character LCD, ADXL345 accelerometer, ultrasonic range finder, FTDI USB-to-serial converter, and the complete passive component set for circuits using PWM, UART, SPI, and I2C. Most builders upgrade to it within weeks anyway. Save by starting with the kit that has everything.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe starting point for STM32 ARM microcontroller development.\u003c\/strong\u003e Everything you need to write your first program, blink your first LED, read your first push button, and start building real circuits — without spending hours sourcing parts from a dozen different places.\u003c\/p\u003e\n\n\u003cp\u003eThis kit is built around the STM32F030 microcontroller, mounted on a breakout board designed specifically to span three breadboards. That gives every pin nine separate connection points (four on one tie strip, five on the other) — much more room to wire up circuits than a standard dev kit gives you.\u003c\/p\u003e\n\n\u003ch3\u003eWho this kit is for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBeginners stepping up from Arduino into the STM32 ARM ecosystem\u003c\/li\u003e\n  \u003cli\u003eHobbyists who want to learn embedded C with a modern industry-standard chip\u003c\/li\u003e\n  \u003cli\u003eStudents starting a self-paced or classroom STM32 curriculum\u003c\/li\u003e\n  \u003cli\u003eAnyone who has some programming experience and wants a clean starting point — without the cost or complexity of a full sensor suite\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eSome prior programming experience helps. Arduino-level familiarity, Python, or any C-family language is enough to get going.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eMicrocontroller and programmer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSTM32F030 microcontroller mounted on a breakout board\u003c\/li\u003e\n  \u003cli\u003eST-Link V2 programmer\u003c\/li\u003e\n  \u003cli\u003eConnection cable for the ST-Link V2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePrototyping platform:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e(3) Solderless breadboards (configured for 9-tie-point pin access)\u003c\/li\u003e\n  \u003cli\u003eSolid-core jumper wire set — 140 total hookup wires in assorted lengths and colors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInputs and outputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e(4) Push buttons\u003c\/li\u003e\n  \u003cli\u003e(12) Green LEDs\u003c\/li\u003e\n  \u003cli\u003e(2) Red LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eResistors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e(4) 1kΩ\u003c\/li\u003e\n  \u003cli\u003e(4) 4.7kΩ\u003c\/li\u003e\n  \u003cli\u003e(20) 330Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCapacitors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e(2) 10µF electrolytic\u003c\/li\u003e\n  \u003cli\u003e(2) 100µF electrolytic\u003c\/li\u003e\n  \u003cli\u003e(6) 100nF \/ 0.1µF ceramic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this kit does NOT include\u003c\/h3\u003e\n\u003cp\u003eThis kit is intentionally lean to keep the price low. It does not include sensors, displays, voltage regulators, crystals, or serial communication adapters. If you want those, see the \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-intermediate-kit\"\u003eIntermediate Kit\u003c\/a\u003e or \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook\"\u003eAdvanced Kit\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat you'll need to supply\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eA computer (Windows, Mac, or Linux) for programming the STM32\u003c\/li\u003e\n  \u003cli\u003eSTM32CubeIDE or your preferred ARM toolchain (free, downloaded from STMicroelectronics)\u003c\/li\u003e\n  \u003cli\u003eUSB cable for the ST-Link V2 (some computers may require a USB-A to USB-Micro adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFree tutorial library\u003c\/h3\u003e\n\u003cp\u003eHundreds of free STM32 tutorials, code examples, and project walkthroughs are available on our companion site, \u003ca href=\"https:\/\/newbiehack.com\"\u003eNewbieHack.com\u003c\/a\u003e. Topics include GPIO, push button input, timers and PWM, interrupts, and the basics of embedded C — all of which can be done with the components in this kit.\u003c\/p\u003e\n\n\u003ch3\u003eFree YouTube tutorials\u003c\/h3\u003e\n\n\u003cp\u003ePatrick Hood-Daniel — the designer of this kit and author of \u003cem\u003eARM Microcontrollers: Programming and Circuit Building, Volume 1\u003c\/em\u003e — has a full library of free STM32 tutorials on YouTube using the exact components in this kit. Watch the lessons, follow along with your hardware, and learn from the same person who built the kit you're holding. \u003ca href=\"https:\/\/www.youtube.com\/@PatrickHoodDaniel\"\u003eSubscribe to the channel here.\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFree customer support included\u003c\/h3\u003e\n\u003cp\u003eEvery kit purchase includes free support on what you've purchased. Stuck on getting the ST-Link to recognize the chip, configuring your toolchain, or wiring your first circuit? Reply to your order email and we'll help you get unstuck.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to know C programming before buying this kit?\u003c\/strong\u003e\u003cbr\u003e\nSome prior programming experience helps. Arduino, Python, or any C-family language is enough. If you've never programmed before, you'll need to pair this kit with C learning resources — there are many free options online.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: What software do I need?\u003c\/strong\u003e\u003cbr\u003e\nSTM32CubeIDE is the official free IDE from STMicroelectronics and works on Windows, Mac, and Linux. It's what we use throughout our tutorials at NewbieHack.com.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Why STM32 instead of Arduino?\u003c\/strong\u003e\u003cbr\u003e\nThe STM32F030 runs at higher clock speeds, has more peripheral options, more flexible interrupt handling, true hardware timers, and a much richer ecosystem for professional embedded work. If you're planning a career in embedded systems or want to design more sophisticated circuits, ARM is where the industry has gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: How is this different from the Ultra Basic Kit?\u003c\/strong\u003e\u003cbr\u003e\nThe \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/stm32-arm-microcontroller-ultra-basic-kit\"\u003eUltra Basic Kit\u003c\/a\u003e contains only the STM32F030 chip, the ST-Link programmer, breadboards, and the breakout board. It's designed for builders who already have resistors, LEDs, capacitors, and jumper wires on hand. This Beginners Kit adds all the basic passives so you can start building circuits immediately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: How is this different from the Intermediate and Advanced Kits?\u003c\/strong\u003e\u003cbr\u003e\nThe \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-intermediate-kit\"\u003eIntermediate Kit\u003c\/a\u003e adds an OLED display, voltage regulators, crystals, an FTDI USB-to-serial converter, potentiometers, and additional capacitors — for circuits using PWM, UART, SPI, and I2C. The \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook\"\u003eAdvanced Kit\u003c\/a\u003e adds an ADXL345 accelerometer, ultrasonic range finder, and 20x4 LCD on top of all that.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is the ST-Link V2 a clone or genuine?\u003c\/strong\u003e\u003cbr\u003e\nWe ship the standard ST-Link V2 programmer that's universally compatible with STM32CubeIDE and OpenOCD. It works identically to the genuine ST-branded unit for the use cases in our tutorials.\u003c\/p\u003e","brand":"BuildYourCNC","offers":[{"title":"ARM Microcontroller Beginners Kit (STM32F0)","offer_id":45875879510190,"sku":"2008","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/IMG_9991-800.jpg?v=1730085917"},{"product_id":"newbiehack-microcontroller-arm-stmicro-stm32f0r6-intermediate-kit","title":"ARM Microcontroller Intermediate Kit (STM32F0)","description":"\u003cdiv style=\"border: 2px solid #2c5282; border-radius: 8px; padding: 16px; margin-bottom: 24px; background: #f7fafc;\"\u003e\n\u003ch4 style=\"margin-top: 0; color: #2c5282;\"\u003eWant the full ARM development experience?\u003c\/h4\u003e\n\u003cp style=\"margin-bottom: 0;\"\u003eThe \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook\"\u003e\u003cstrong\u003eARM Advanced Kit (STM32F0)\u003c\/strong\u003e\u003c\/a\u003e includes everything you need for serious STM32 development — OLED display, 20x4 character LCD, ADXL345 accelerometer, ultrasonic range finder, FTDI USB-to-serial converter, and the complete passive component set for circuits using PWM, UART, SPI, and I2C. Most builders upgrade to it within weeks anyway. Save by starting with the kit that has everything.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe middle-tier STM32 ARM development kit — for builders who've moved past blinking LEDs and want to start using the chip's real peripherals.\u003c\/strong\u003e PWM motor control, UART serial communication, SPI and I2C sensor interfaces, hardware timers, voltage regulation, and crystal-based clock sources — everything you need to start designing circuits that use the STM32F0 feature set the way it was meant to be used.\u003c\/p\u003e\n\u003cp\u003eThis kit includes the STM32F030 microcontroller mounted on a breakout board, configured to span three breadboards. Every pin gets nine separate tie-point connections (four on one strip, five on the other) — significantly more wiring room than a standard dev board provides.\u003c\/p\u003e\n\u003ch3\u003eWho this kit is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilders who've completed the basics (blinking LEDs, push buttons) and want to start using STM32 peripherals\u003c\/li\u003e\n\u003cli\u003eEngineers and hobbyists ready to learn UART, SPI, I2C, PWM, ADC, and hardware timers\u003c\/li\u003e\n\u003cli\u003eSelf-taught learners working through the embedded peripheral tutorials on NewbieHack\u003c\/li\u003e\n\u003cli\u003eStudents who need power regulation, serial communication, and a display for class projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSome prior experience with the STM32 — even just the \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-beginners-kit\"\u003eBeginners Kit\u003c\/a\u003e level — is recommended. If you're brand new to ARM development, start there first.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMicrocontroller and programmer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTM32F030 microcontroller mounted on a breakout board\u003c\/li\u003e\n\u003cli\u003eST-Link V2 programmer\u003c\/li\u003e\n\u003cli\u003eConnection cable for the ST-Link V2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrototyping platform:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Solderless breadboards (configured for 9-tie-point pin access)\u003c\/li\u003e\n\u003cli\u003eSolid-core jumper wire set — 140 total hookup wires in assorted lengths and colors\u003c\/li\u003e\n\u003cli\u003e(1) 40-pin male header strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisplay:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e128x64 OLED display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSerial communication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFTDI USB-to-Serial converter  (ideal for USART development and debugging)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower and timing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5V low-dropout regulator (MAX603)\u003c\/li\u003e\n\u003cli\u003e3V low-dropout regulator (MAX604)\u003c\/li\u003e\n\u003cli\u003e5V 1.5A voltage regulator\u003c\/li\u003e\n\u003cli\u003e16 MHz crystal\u003c\/li\u003e\n\u003cli\u003e18.432 MHz crystal\u003c\/li\u003e\n\u003cli\u003e(2) 22pF 200V capacitors (for use with the crystals)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLogic and control:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuad buffer line driver\u003c\/li\u003e\n\u003cli\u003e(4) Push buttons\u003c\/li\u003e\n\u003cli\u003e(3) 10kΩ trimmer potentiometers\u003c\/li\u003e\n\u003cli\u003e(1) 50kΩ potentiometer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLEDs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(12) Green LEDs\u003c\/li\u003e\n\u003cli\u003e(2) Red LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResistors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 1kΩ\u003c\/li\u003e\n\u003cli\u003e(4) 4.7kΩ\u003c\/li\u003e\n\u003cli\u003e(20) 330Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCapacitors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 10µF electrolytic\u003c\/li\u003e\n\u003cli\u003e(4) 100µF electrolytic\u003c\/li\u003e\n\u003cli\u003e(11) 100nF \/ 0.1µF ceramic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat this kit does NOT include\u003c\/h3\u003e\n\u003cp\u003eThis kit covers the core peripherals but does not include the full sensor suite. If you want an accelerometer, ultrasonic range finder, or character LCD, see the \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook\"\u003eAdvanced Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat you'll need to supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA computer (Windows, Mac, or Linux) for programming the STM32\u003c\/li\u003e\n\u003cli\u003eSTM32CubeIDE or your preferred ARM toolchain (free, downloaded from STMicroelectronics)\u003c\/li\u003e\n\u003cli\u003eUSB cable for the ST-Link V2 (some computers may require a USB-A to USB-Micro adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFree YouTube tutorials\u003c\/h3\u003e\n\u003cp\u003ePatrick Hood-Daniel — the designer of this kit and author of \u003cem\u003eARM Microcontrollers: Programming and Circuit Building, Volume 1\u003c\/em\u003e — has a full library of free STM32 tutorials on YouTube using the exact components in this kit. Watch the lessons, follow along with your hardware, and learn from the same person who built the kit you're holding. \u003ca href=\"https:\/\/www.youtube.com\/@PatrickHoodDaniel\"\u003eSubscribe to the channel here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFree tutorial library\u003c\/h3\u003e\n\u003cp\u003eHundreds of free STM32 tutorials, code examples, and project walkthroughs are also available on our companion site, \u003ca href=\"https:\/\/newbiehack.com\"\u003eNewbieHack.com\u003c\/a\u003e. Topics include UART\/SPI\/I2C, PWM, hardware timers, ADC, low-power modes, and driving stepper motors directly from the STM32 — exactly the peripherals this kit was built for.\u003c\/p\u003e\n\u003ch3\u003eFree customer support included\u003c\/h3\u003e\n\u003cp\u003eEvery kit purchase includes free support on what you've purchased. Stuck on a circuit, getting your peripherals to talk, or debugging a UART setup? Reply to your order email and we'll help you get unstuck.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is this kit different from the Beginners Kit?\u003c\/strong\u003e\u003cbr\u003eThe \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-beginners-kit\"\u003eBeginners Kit\u003c\/a\u003e contains the basics — chip, programmer, breadboards, LEDs, push buttons, and core resistors\/capacitors. This Intermediate Kit adds an OLED display, voltage regulators, crystals, an FTDI USB-to-serial converter, potentiometers, and additional capacitors so you can start working with PWM, UART, SPI, I2C, and timer-based circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is this kit different from the Advanced Kit?\u003c\/strong\u003e\u003cbr\u003eThe \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook\"\u003eAdvanced Kit\u003c\/a\u003e includes everything in this kit plus an ADXL345 3-axis accelerometer, ultrasonic range finder, and 20x4 character LCD. If you know you'll want to work with sensors and a larger display, the price difference is usually less than buying those components separately later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What can I actually build with this kit?\u003c\/strong\u003e\u003cbr\u003ePWM motor speed controllers, OLED data displays, serial debug consoles, voltage-regulated sensor circuits, timer-driven event loops, button-debounced inputs, simple oscillator-based projects, and any circuit that uses UART\/SPI\/I2C communication.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What software do I need?\u003c\/strong\u003e\u003cbr\u003eSTM32CubeIDE is the official free IDE from STMicroelectronics and is what we use throughout our tutorials. Available on Windows, Mac, and Linux.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why STM32 instead of Arduino?\u003c\/strong\u003e\u003cbr\u003eThe STM32F030 runs at higher clock speeds, has more peripheral options, more flexible interrupt handling, true hardware timers, and a much richer ecosystem for professional embedded work. If you're planning a career in embedded systems or want to design more sophisticated circuits, ARM is where the industry has gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the ST-Link V2 a clone or genuine?\u003c\/strong\u003e\u003cbr\u003eWe ship the standard ST-Link V2 programmer that's universally compatible with STM32CubeIDE and OpenOCD. It works identically to the genuine ST-branded unit for the use cases in our tutorials.\u003c\/p\u003e","brand":"BuildYourCNC","offers":[{"title":"ARM Microcontroller Intermediate Kit (STM32F0)","offer_id":45875879542958,"sku":"2009","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/IMG_0006-800.jpg?v=1730085941"},{"product_id":"newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook","title":"ARM Microcontroller Advanced Kit (STM32F0)","description":"\u003cp\u003e\u003cstrong\u003eOur top-tier STM32 ARM development kit — built for serious embedded developers, advanced hobbyists, and engineering students who want everything in one box.\u003c\/strong\u003e Sensors, displays, serial communication, voltage regulation, crystals, and a complete passive component set — the components you need to build almost any STM32-based circuit or project, without sourcing parts from a dozen different suppliers.\u003c\/p\u003e\n\u003cp\u003eThis kit centers on the STM32F030 microcontroller mounted on a breakout board configured to span three breadboards. Every pin gets nine separate tie-point connections (four on one strip, five on the other) — significantly more wiring room than any standard dev board, and a far cleaner prototyping experience for circuits that use multiple peripherals at once.\u003c\/p\u003e\n\u003ch3\u003eWho this kit is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSerious hobbyists ready to take on motion-sensing, distance-sensing, and display-driven projects\u003c\/li\u003e\n\u003cli\u003eEngineers prototyping STM32 designs before committing to a custom PCB\u003c\/li\u003e\n\u003cli\u003eStudents working through advanced embedded systems coursework\u003c\/li\u003e\n\u003cli\u003eBuilders coming from Arduino who want a fully-loaded ARM kit instead of buying components piecemeal\u003c\/li\u003e\n\u003cli\u003eAnyone tired of running out of components mid-project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSome prior microcontroller experience is recommended — Arduino, AVR, or working through the \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-beginners-kit\"\u003eARM Beginners Kit\u003c\/a\u003e first is a good foundation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy this kit instead of buying components separately\u003c\/h3\u003e\n\u003cp\u003eSourcing the same components from Amazon and Mouser typically runs $40–80 more than this kit, requires multiple shipments, and leaves you with mismatched parts that don't always work together. Every component in this kit was selected to work cleanly with the STM32F030 and with each other — no surprises, no incompatibility issues, no wasted time.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMicrocontroller and programmer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTM32F030 microcontroller mounted on a breakout board\u003c\/li\u003e\n\u003cli\u003eST-Link V2 programmer\u003c\/li\u003e\n\u003cli\u003eConnection cable for the ST-Link V2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrototyping platform:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Solderless breadboards (configured for 9-tie-point pin access)\u003c\/li\u003e\n\u003cli\u003eSolid-core jumper wire set — 140 total hookup wires in assorted lengths and colors\u003c\/li\u003e\n\u003cli\u003e(1) 40-pin male header strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSensors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eADXL345 3-axis accelerometer (I2C and SPI compatible)\u003c\/li\u003e\n\u003cli\u003eUltrasonic range finder (distance measuring transducer)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisplays:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e128x64 OLED display\u003c\/li\u003e\n\u003cli\u003e20x4 LCD character display module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSerial communication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFTDI USB-to-Serial converter (ideal for USART development and debugging)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower and timing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3.3V low-dropout regulator\u003c\/li\u003e\n\u003cli\u003e5V 1.5A voltage regulator\u003c\/li\u003e\n\u003cli\u003e16 MHz crystal\u003c\/li\u003e\n\u003cli\u003e18.432 MHz crystal\u003c\/li\u003e\n\u003cli\u003e(2) 22pF 200V capacitors (for use with the crystals)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLogic and control:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuad buffer line driver\u003c\/li\u003e\n\u003cli\u003e(4) Push buttons\u003c\/li\u003e\n\u003cli\u003e(3) 10kΩ trimmer potentiometers\u003c\/li\u003e\n\u003cli\u003e(1) 50kΩ potentiometer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLEDs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(12) Green LEDs\u003c\/li\u003e\n\u003cli\u003e(2) Red LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResistors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 1kΩ\u003c\/li\u003e\n\u003cli\u003e(4) 4.7kΩ\u003c\/li\u003e\n\u003cli\u003e(20) 330Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCapacitors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 10µF electrolytic\u003c\/li\u003e\n\u003cli\u003e(4) 100µF electrolytic\u003c\/li\u003e\n\u003cli\u003e(13) 100nF \/ 0.1µF ceramic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat you can build\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMotion-controlled devices using the ADXL345 accelerometer\u003c\/li\u003e\n\u003cli\u003eDistance-sensing and proximity-detection circuits with the ultrasonic range finder\u003c\/li\u003e\n\u003cli\u003eData-logging systems with OLED or 20x4 LCD output\u003c\/li\u003e\n\u003cli\u003eUART\/SPI\/I2C communication between the STM32 and other devices\u003c\/li\u003e\n\u003cli\u003ePWM-driven motor controllers\u003c\/li\u003e\n\u003cli\u003eTimer-based event loops and interrupt-driven inputs\u003c\/li\u003e\n\u003cli\u003eVoltage-regulated sensor circuits using the LDO and 5V regulator\u003c\/li\u003e\n\u003cli\u003eCrystal-based precision oscillator projects\u003c\/li\u003e\n\u003cli\u003eBare-metal STM32 development for register-level learning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePair with the textbook\u003c\/h3\u003e\n\u003cp\u003eWant a structured curriculum to work through? The \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kitbook\"\u003e\u003cstrong\u003eARM Advanced Kit + Book bundle\u003c\/strong\u003e\u003c\/a\u003e includes Patrick Hood-Daniel's \u003cem\u003eARM Microcontrollers: Programming and Circuit Building, Volume 1\u003c\/em\u003e — a complete textbook designed specifically to teach STM32 development using the components in this kit. Buying them together costs less than buying them separately. Used in universities and high school engineering programs across the country.\u003c\/p\u003e\n\u003ch3\u003eWhat you'll need to supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA computer (Windows, Mac, or Linux) for programming the STM32\u003c\/li\u003e\n\u003cli\u003eSTM32CubeIDE or your preferred ARM toolchain (free, downloaded from STMicroelectronics)\u003c\/li\u003e\n\u003cli\u003eUSB cable for the ST-Link V2 (some computers may require a USB-A to USB-Micro adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFree YouTube tutorials\u003c\/h3\u003e\n\u003cp\u003ePatrick Hood-Daniel — the designer of this kit and author of \u003cem\u003eARM Microcontrollers: Programming and Circuit Building, Volume 1\u003c\/em\u003e — has a full library of free STM32 tutorials on YouTube using the exact components in this kit. Watch the lessons, follow along with your hardware, and learn from the same person who built the kit you're holding. \u003ca href=\"https:\/\/www.youtube.com\/@PatrickHoodDaniel\"\u003eSubscribe to the channel here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFree tutorial library\u003c\/h3\u003e\n\u003cp\u003eHundreds of additional STM32 tutorials, code examples, and project walkthroughs are available on our companion site, \u003ca href=\"https:\/\/newbiehack.com\"\u003eNewbieHack.com\u003c\/a\u003e. Topics include GPIO, timers and PWM, interrupts, UART\/SPI\/I2C, ADC, low-power modes, and driving stepper motors directly from the STM32.\u003c\/p\u003e\n\u003ch3\u003eFree customer support included\u003c\/h3\u003e\n\u003cp\u003eEvery kit purchase includes free support on what you've purchased. Stuck on a sensor wiring, debugging a peripheral configuration, or trying to get the OLED to display? Reply to your order email and we'll help you get unstuck.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is this different from the Intermediate Kit?\u003c\/strong\u003e\u003cbr\u003eThe \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-intermediate-kit\"\u003eIntermediate Kit\u003c\/a\u003e covers the core peripherals — OLED, voltage regulators, crystals, FTDI converter, and passive components for PWM\/UART\/SPI\/I2C work. This Advanced Kit adds the ADXL345 accelerometer, ultrasonic range finder, and 20x4 LCD on top of all that. If you know you'll want to work with sensors, the price difference here is usually less than buying those components separately later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Should I get this kit or the Advanced Kit + Book bundle?\u003c\/strong\u003e\u003cbr\u003eThe components are identical. Get the bundle if you want a structured textbook to learn from — Patrick's book teaches STM32 development from the ground up using exactly these components, and the bundle costs less than buying both separately. Get this kit-only version if you already know embedded C or prefer to learn from free YouTube and online tutorials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What can I do with the ADXL345 accelerometer?\u003c\/strong\u003e\u003cbr\u003eTilt detection, gesture recognition, vibration monitoring, motion-activated triggers, drone\/quadcopter prototyping, fall detection, and any project where you need to know how a device is being moved or oriented. It supports both I2C and SPI for flexible integration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What can I do with the ultrasonic range finder?\u003c\/strong\u003e\u003cbr\u003eDistance measurement (typically 2cm–4m), proximity sensing, parking sensors, robot obstacle avoidance, level monitoring in liquids\/grain bins, and any project where you need to know how far an object is from the sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this work on macOS or Linux?\u003c\/strong\u003e\u003cbr\u003eYes. STM32CubeIDE is available on Windows, macOS, and Linux. The ST-Link V2 programmer is recognized natively on all three.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why STM32 instead of Arduino?\u003c\/strong\u003e\u003cbr\u003eThe STM32F030 runs at higher clock speeds, has more peripheral options, more flexible interrupt handling, true hardware timers, and a much richer ecosystem for professional embedded work. If you're planning a career in embedded systems or want to design more sophisticated circuits, ARM is where the industry has gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the ST-Link V2 a clone or genuine?\u003c\/strong\u003e\u003cbr\u003eWe ship the standard ST-Link V2 programmer that's universally compatible with STM32CubeIDE and OpenOCD. It works identically to the genuine ST-branded unit for the use cases in our tutorials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do you offer educational discounts?\u003c\/strong\u003e\u003cbr\u003eYes — bulk pricing for orders of 10+ kits is available for schools, universities, and educational programs. \u003ca href=\"https:\/\/buildyuurcnc.com\/pages\/contact\"\u003eContact us\u003c\/a\u003e for a quote.\u003c\/p\u003e","brand":"BuildYourCNC","offers":[{"title":"ARM Microcontroller Advanced Kit (STM32F0)","offer_id":45875879575726,"sku":"2010","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/IMG_0030-800.jpg?v=1730085978"},{"product_id":"newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kitbook","title":"ARM Microcontroller Advanced Kit with Book","description":"\u003cdiv style=\"border: 2px solid #2c5282; border-radius: 8px; padding: 16px; margin-bottom: 24px; background: #f7fafc;\"\u003e\n\u003ch4 style=\"margin-top: 0; color: #2c5282;\"\u003eAlready familiar with embedded C?\u003c\/h4\u003e\n\u003cp style=\"margin-bottom: 0;\"\u003eIf you don't need the companion textbook, the \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook\"\u003e\u003cstrong\u003eARM Advanced Kit (STM32F0)\u003c\/strong\u003e\u003c\/a\u003e contains the same component set without the book at a lower price. Hundreds of free STM32 tutorials are also available on our companion site at \u003ca href=\"https:\/\/newbiehack.com\"\u003eNewbieHack.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eThe complete STM32 ARM development kit, paired with the textbook written specifically to teach you how to use it.\u003c\/strong\u003e Used in universities and high school engineering programs across the country.\u003c\/p\u003e\n\u003cp\u003eThis is our top-tier ARM kit bundled with \u003cem\u003eARM Microcontrollers: Programming and Circuit Building, Volume 1\u003c\/em\u003e by Patrick Hood-Daniel — a complete from-the-ground-up guide to professional STM32 development. The book and kit were designed together: every chapter exercise uses components included in this kit, and every component in the kit gets covered in the book.\u003c\/p\u003e\n\u003ch3\u003eWho this kit is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStudents learning embedded systems, EE, or computer engineering\u003c\/li\u003e\n\u003cli\u003eHobbyists transitioning from Arduino into bare-metal C development\u003c\/li\u003e\n\u003cli\u003eHigh school and university instructors building a structured ARM curriculum\u003c\/li\u003e\n\u003cli\u003eEngineers who want a self-paced way to add STM32 to their skill set\u003c\/li\u003e\n\u003cli\u003eSelf-taught learners who prefer a structured book-driven approach over scattered tutorials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSome prior programming experience helps — Arduino, Python, or any C-family language is enough. The book teaches embedded C concepts as you build, but it's not a \"learn to code from zero\" resource.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy this kit + book combination\u003c\/h3\u003e\n\u003cp\u003eMost STM32 learning resources online assume you already know what you're doing. This bundle solves that gap. The book walks through GPIO, timers, PWM, interrupts, ADC, UART, SPI, I2C, and bare-metal register-level programming — using the exact components included in the kit. You don't need to source parts, hunt for tutorials, or guess which sensor module the lesson is referring to. Open the book, open the kit, and start building.\u003c\/p\u003e\n\u003ch3\u003eThe breakout board advantage\u003c\/h3\u003e\n\u003cp\u003eThe included STM32F030 development board is mounted across three breadboards in a configuration that gives every microcontroller pin \u003cstrong\u003enine separate tie-point connections\u003c\/strong\u003e — four on one tie strip and five on the other. That means more room to wire complex circuits without daisy-chaining jumpers, and a much cleaner prototyping experience compared to standard dev kits.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe book:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eARM Microcontrollers: Programming and Circuit Building, Volume 1\u003c\/em\u003e by Patrick Hood-Daniel (Apress)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMicrocontroller and programmer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTM32F030 microcontroller mounted on a breakout board\u003c\/li\u003e\n\u003cli\u003eST-Link V2 programmer\u003c\/li\u003e\n\u003cli\u003eConnection cable for the ST-Link V2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePrototyping platform:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Solderless breadboards (configured for 9-tie-point pin access)\u003c\/li\u003e\n\u003cli\u003eSolid-core jumper wire set — 140 total hookup wires in assorted lengths and colors\u003c\/li\u003e\n\u003cli\u003e(1) 40-pin male header strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSensors and displays:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltrasonic range finder\u003c\/li\u003e\n\u003cli\u003eADXL345 3-axis accelerometer\u003c\/li\u003e\n\u003cli\u003e128x64 OLED display\u003c\/li\u003e\n\u003cli\u003e20x4 LCD character display module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSerial communication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFTDI USB-to-Serial converter (ideal for USART development and debugging)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower and timing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5V low-dropout regulator (MAX603)\u003c\/li\u003e\n\u003cli\u003e3V low-dropout regulator (MAX604)\u003c\/li\u003e\n\u003cli\u003e5V 1.5A voltage regulator\u003c\/li\u003e\n\u003cli\u003e16 MHz crystal\u003c\/li\u003e\n\u003cli\u003e18.432 MHz crystal\u003c\/li\u003e\n\u003cli\u003e(2) 22pF 200V capacitors (for use with the crystals)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLogic and control:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuad buffer line driver\u003c\/li\u003e\n\u003cli\u003e(4) Push buttons\u003c\/li\u003e\n\u003cli\u003e(3) 10kΩ trimmer potentiometers\u003c\/li\u003e\n\u003cli\u003e(1) 50kΩ potentiometer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLEDs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(12) Green LEDs\u003c\/li\u003e\n\u003cli\u003e(2) Red LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResistors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 1kΩ\u003c\/li\u003e\n\u003cli\u003e(4) 10kΩ\u003c\/li\u003e\n\u003cli\u003e(20) 330Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCapacitors:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 10µF electrolytic\u003c\/li\u003e\n\u003cli\u003e(4) 100µF electrolytic\u003c\/li\u003e\n\u003cli\u003e(13) 100nF \/ 0.1µF ceramic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat you'll need to supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA computer (Windows, Mac, or Linux) for programming the STM32\u003c\/li\u003e\n\u003cli\u003eSTM32CubeIDE or your preferred ARM toolchain (free, downloaded from STMicroelectronics)\u003c\/li\u003e\n\u003cli\u003eUSB cable for the ST-Link V2 (some computers may require a USB-A to USB-Micro adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUsed in classrooms\u003c\/h3\u003e\n\u003cp\u003eThis bundle is widely adopted in university EE programs and high school engineering courses as a structured, self-contained STM32 curriculum. Bulk pricing for educational orders of 10+ kits is available — \u003ca href=\"https:\/\/buildyuurcnc.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003ch3\u003eFree customer support included\u003c\/h3\u003e\n\u003cp\u003eEvery kit purchase includes free support on what you've purchased. Stuck on a circuit, a programming concept, or getting the ST-Link to recognize the chip? Reply to your order email and we'll help you get unstuck.\u003c\/p\u003e\n\u003ch3\u003eFree tutorial library\u003c\/h3\u003e\n\u003cp\u003eIn addition to the book, hundreds of free STM32 tutorials, code examples, and project walkthroughs are available on our companion site, \u003ca href=\"https:\/\/newbiehack.com\"\u003eNewbieHack.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFree YouTube tutorials\u003c\/h3\u003e\n\u003cp\u003ePatrick Hood-Daniel — the designer of this kit and author of \u003cem\u003eARM Microcontrollers: Programming and Circuit Building, Volume 1\u003c\/em\u003e — has a full library of free STM32 tutorials on YouTube using the exact components in this kit. Watch the lessons, follow along with your hardware, and learn from the same person who built the kit you're holding. \u003ca href=\"https:\/\/www.youtube.com\/@PatrickHoodDaniel\"\u003eSubscribe to the channel here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between this kit and the ARM Advanced Kit without the book?\u003c\/strong\u003e\u003cbr\u003eThe components are identical. This bundle adds \u003cem\u003eARM Microcontrollers: Programming and Circuit Building, Volume 1\u003c\/em\u003e by Patrick Hood-Daniel — a complete textbook designed specifically to teach STM32 development using the kit's components. If you already know embedded C or prefer free online tutorials, the \u003ca href=\"https:\/\/buildyuurcnc.com\/products\/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook\"\u003ekit-only version\u003c\/a\u003e is a lower-priced option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to know C programming before buying this bundle?\u003c\/strong\u003e\u003cbr\u003eSome prior programming experience helps — Arduino, Python, or any C-family language is enough to get going. The book teaches embedded C concepts as you build, but it's not a \"learn to code from zero\u003c\/p\u003e","brand":"BuildYourCNC","offers":[{"title":"ARM Advanced Kit with Book Vol 1","offer_id":45875887964334,"sku":"6785","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/ARMAdvancedWithBook-800.jpg?v=1730087253"},{"product_id":"newbiehack-microcontroller-arm-book","title":"ARM Microcontrollers: Programming and Circuit Building Volume 1 Book","description":"Unlock the full potential of ARM microcontrollers and take your electronics projects to the next level with ARM Microcontrollers: Programming and Circuit Building Volume 1. This in-depth guide provides a hands-on approach to programming bare-chip ARM microcontrollers and designing custom circuits from scratch. Learn to create cutting-edge projects for IoT, robotics, smart devices, and much more, with detailed instructions and step-by-step tutorials that make even complex concepts easy to grasp.    Whether you're a beginner or have experience with platforms like Arduino, this book teaches you how to transition to ARM microcontroller programming, where you’ll gain real-world coding and circuit-building skills. Discover how to develop optimized, production-ready electronics with minimal components—perfect for anyone looking to bring a product idea to market or advance in the field of embedded systems development.  \u003cb\u003eWhy Choose This Book?\u003c\/b\u003e  If you're an Arduino user looking to expand your knowledge and build more efficient, scalable projects, ARM Microcontrollers: Programming and Circuit Building Volume 1 is the perfect next step. Unlike Arduino, ARM microcontrollers provide deeper control over hardware and greater flexibility for real-world applications. With bare-chip programming, you’ll be able to design streamlined, cost-effective electronics for consumer products, IoT systems, robotics, smart home devices, and more.  \u003cb\u003eKey Features:\u003c\/b\u003e  Beginner-Friendly: No prior experience with ARM microcontrollers needed. Start from the basics and gradually move toward more advanced projects.   Production-Ready Circuits: Learn to build custom electronics from the ground up, focusing on efficiency, minimal components, and cost-effectiveness.   Advanced Programming Techniques: Write your own C\/C++ code and libraries, and gain control over hardware with advanced ARM programming concepts.   Real-World Applications: Build circuits that interact with the environment, communicate with devices and sensors, and drive motors for robotics and motion control.   From Arduino to ARM: Make the leap from Arduino-based projects to the power of ARM microcontrollers, and learn skills that will help you in the professional embedded systems industry.   \u003cb\u003eWho Should Read This Book?\u003c\/b\u003e  Arduino Enthusiasts: If you're tired of one-off projects and want to learn real microcontroller programming, this book will teach you how to code directly on ARM chips.   Makers and Tinkerers: Ready to step up your DIY electronics game? This guide gives you the power to create sophisticated, efficient designs.   Engineering Students: If you want to learn embedded systems and microcontroller programming, this book is written in plain language for beginners and those seeking to build real-world projects.   IoT Developers: Interested in building devices for the Internet of Things? Learn how to integrate ARM microcontrollers into your designs for smarter, more efficient solutions.   \u003cb\u003eTake Control of Your Projects\u003c\/b\u003e   Say goodbye to development boards loaded with unnecessary components. With this book, you'll learn how to design circuits that use only what’s needed, and how to write optimized code for high-volume production or job-ready skills. You’ll be able to:  Design and build your own schematics and circuit layouts   Write efficient state machine and interrupt-driven code for critical applications   Gain expertise in ARM microcontroller programming for real-world embedded systems development   \u003cb\u003eBuild the Future with ARM\u003c\/b\u003e   Whether you're looking to develop the next big IoT device, create consumer electronics, or land a job in embedded systems development, ARM Microcontrollers: Programming and Circuit Building Volume 1 equips you with the skills and knowledge to succeed. Don’t settle for pre-packaged solutions—take full control of your projects and bring your ideas to life with ARM microcontrollers.","brand":"BuildYourCNC","offers":[{"title":"Arm Microcontrollers: Programming and Circuit Building Volume 1 by Patrick Hood-Daniel","offer_id":45875888586926,"sku":"6819","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/Screenshot_202024-09-29_20231215-800.jpg?v=1730087360"},{"product_id":"64-pin-lqfp-breakout-3-sided-configuration","title":"64 Pin LQFP Breakout (3 Sided Configuration)","description":"\u003ch1 class=\"text-2xl font-bold mt-1 text-text-100\"\u003eNewbieHack LQFP-64 Breakout Board\u003c\/h1\u003e\n\u003cp class=\"whitespace-pre-wrap break-words\"\u003e\u003cstrong\u003eProfessional-Grade LQFP-64 to Breadboard Adapter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"whitespace-pre-wrap break-words\"\u003eThe NewbieHack LQFP-64 Breakout Board is the perfect solution for electronics enthusiasts, hobbyists, and professionals looking to easily prototype with LQFP-64 packaged microcontrollers. This elegantly designed purple PCB provides a convenient bridge between surface-mount technology and standard breadboard experimentation.\u003c\/p\u003e\n\u003cp class=\"whitespace-pre-wrap break-words\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc space-y-1.5 pl-7\"\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eAdapts LQFP-64 (Low-profile Quad Flat Package) ICs to standard 0.1\" breadboard header pins\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003ePremium-quality purple PCB with clear pin numbering for easy reference\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eTriple breadboard compatibility design for optimal workspace organization\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eComplete kit includes all necessary header pins (unsoldered for flexible configuration)\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eLabeled pin connections for straightforward debugging and prototyping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"whitespace-pre-wrap break-words\"\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc space-y-1.5 pl-7\"\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003e1× NewbieHack LQFP-64 Breakout PCB - Microcontroller not included\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003e2× 30-pin headers\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003e1× 4-pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"whitespace-pre-wrap break-words\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc space-y-1.5 pl-7\"\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eMicrocontroller NOT included\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eSoldering required: User must solder both the header pins and the LQFP-64 package\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eAdvanced soldering skills necessary for the 64-pin SMD microcontroller attachment\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eFine-pitch soldering tools recommended (soldering iron with fine tip, flux, and magnification)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"whitespace-pre-wrap break-words\"\u003e\u003cstrong\u003eIdeal Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc space-y-1.5 pl-7\"\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eMicrocontroller development and testing\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eCustom embedded systems prototyping\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eEducational projects and workshops\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eProfessional electronics design validation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"whitespace-pre-wrap break-words\"\u003eOur triple breadboard configuration approach allows for optimal workspace organization, giving you more room to build complex circuits while maintaining a clean setup.\u003c\/p\u003e\n\u003cp class=\"whitespace-pre-wrap break-words\"\u003eGet started on your next microcontroller project with confidence - order your NewbieHack LQFP-64 Breakout Board today!\u003c\/p\u003e","brand":"BuildYourCNC","offers":[{"title":"Default Title","offer_id":46422531670190,"sku":"2003","price":7.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/IMG_20250426_204632.jpg?v=1745716925"}],"url":"https:\/\/buildyuurcnc.com\/collections\/arm-stm32-microcontroller-kits.oembed","provider":"BuildYourCNC","version":"1.0","type":"link"}