{"title":"Compression Profiling","description":"\u003cp\u003eSpecial end mills designed to minimize delamination in composite materials. \u003cspan\u003eIf you want a good quality cut along the top and bottom edge, the compression tool is what you will need.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"endmill-compression-onsrud-25-cut-2-flute","title":"Onsrud 1\/4\" Cut Diameter Two Flute Compression End Mill for Wood and Laminated Wood","description":"A combination upcut and downcut end mill cutter for best quality on the top and bottom edges of the material being cut. Very High Quality End Mill from Onsrud Will create a flat bottom surface    \u003cp\u003e\u003c\/p\u003e\u003cp\u003eThis is a tool from Onsrud that exhibits upcut and downcut flutes in the same cutting area of the tool. The upcut portion is on the end of the end mill, and the downcut portion is on the upper portion of the end mill. So, why would a cutting bit need this geometry of flutes? The upcut end mills leave a poor edge quality on the top of the work piece and conversely, the downcut end mills leave a poor edge quality on the bottom of the edge work piece. The reason for this is that the cutting action, either up or down, will respectively pull up the edges, or push down the edges. It's like pealing the skin off of the edge. If you have the cutting action in the opposite direction of the face of the edge (i.e. downcutting on the top edge), the skin of the wood is forced into the inner portion of the wood rather than the skin peeled up.\u003c\/p\u003e\u003cp\u003eCut Diameter - 1\/4 inch or 6.35mm\u003cbr\u003e Shank diameter - 1\/4 inch or 6.35mm\u003cbr\u003e Excellent Quality on Top and Bottom Edges of Cut\u003c\/p\u003e\u003cp\u003eSoft Wood, Soft Plywood, Laminate Chipboard and Laminated Plywood:\u003cbr\u003eChip load: .015 to .017\u003cbr\u003eSuggested Low End Feed Rate: 540 IPM\u003cbr\u003eSuggested High End Feed Rate: 612 IPM\u003c\/p\u003e\u003cp\u003eHard Wood and Hard Plywood:\u003cbr\u003eChip Load: .014 to .016\u003cbr\u003eSuggested Low End Feed Rate: 504 IPM\u003cbr\u003eSuggested High End Feed Rate: 576 IPM\u003c\/p\u003e\u003cp\u003eMDF (Medium Density Fiberboard):\u003cbr\u003eChip Load: .013 to .015\u003cbr\u003eSuggested Low End Feed Rate: 468 IPM\u003cbr\u003eSuggested High End Feed Rate: 540 IPM\u003c\/p\u003e\u003cp\u003eAll Feed Rates are based on 18,000 Spindle RPM\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"BuildYourCNC","offers":[{"title":"(60-113MW) Onsrud Compression End Mill - Cut Length - 7\/8 inch or 22.225mm","offer_id":45875866271918,"sku":"524","price":134.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/onsrudcompression-2-.25x.875-200.jpg?v=1730084075"},{"product_id":"endmill-onsrud-60-173mw","title":"LMT Onsrud 60-173MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000\" Overall Length, 0.5000\" Cutting Diameter, 0.5000\" Shank","description":"\u003cp\u003eLMT Onsrud 60-173MW LMT Onsrud 60-173MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000\" Overall Length, 0.5000\" Cutting Diameter, 0.5000\" Shank Diameter    Designed for maximum life when cutting in high wear applications. Unique geometries and carbides improve the wear characteristics of the tool under abrasive applications with superior part finish. Use on double sided laminated and vaneered materials.\u003c\/p\u003e","brand":"BuildYourCNC","offers":[{"title":"LMT Onsrud 60-173MW","offer_id":45875884490926,"sku":"6345","price":217.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/7516\/3822\/files\/317H5r_2Bt40L.jpg?v=1730086778"}],"url":"https:\/\/buildyuurcnc.com\/collections\/compression-profiling.oembed","provider":"BuildYourCNC","version":"1.0","type":"link"}