BuildYourCNC
DIN Rail Support for C94 Breakout Board
DIN Rail Support for C94 Breakout Board
Verfügbarkeit für Abholungen konnte nicht geladen werden
DIN Rail Support for C94 Breakout Board
Mount the C94 multifunction breakout board on standard 35 mm DIN rail inside your CNC control cabinet. The C94 screws onto this support, the support clips onto the rail, and because the UC300ETH motion controller mounts directly on the C94, this one support carries the complete UC300ETH + C94 assembly.
Which DIN rail support do you need?
This one: DIN Rail Support for C94
Get this support if you have the C94 breakout board or the UC300ETH + C94 bundle. The controller rides on the C94, so the C94 is the board that sits on the rail.
- C94 purchased on its own
- UC300ETH + C94 Ethernet CNC Controller Bundle
- A UC300ETH you already have that is mounted on a C94
DIN Rail Support for C76
The C76 is a different size board. If you have the C76 or the UC300ETH + C76 bundle, you need the C76 support. The two supports are not interchangeable.
View DIN Rail Support for C76What this DIN rail support does
This is a mechanical mounting support sized for the C94 multifunction board. The C94 fastens to the support, and the support clips onto standard 35 mm top-hat (TS35) DIN rail, so the board and the UC300ETH on it stay secured and lined up with your drivers, power supply, and relays instead of being screwed loose to the back panel.
Important: This product does not add electrical features to the C94 or the UC300ETH. It does not add inputs, outputs, relays, spindle control, safety monitoring, or terminals. It is strictly a mounting support for a cleaner control cabinet installation.
Best used for
- Mounting the C94 inside a CNC control cabinet or electrical enclosure
- UC300ETH + C94 control box builds on DIN rail
- UCCNC, Mach3, and Mach4 control panels with DIN-mounted drivers, power supplies, and relays
- CNC router, plasma table, laser, mill, and lathe retrofits
- Organized panels with serviceable wiring layouts
Why use DIN rail mounting?
- Keeps the C94 and UC300ETH secured inside the enclosure
- Lines the breakout board up with your other DIN-mounted components
- Makes the control cabinet look cleaner and more professional
- Makes future service or upgrades easier: unclip, swap, clip back on
- No drilling or standoffs in the back panel
Where this fits in your CNC control system
| Part | What it does |
|---|---|
| UC300ETH Motion Controller | Ethernet motion controller for UCCNC, Mach3, and Mach4; mounts directly on the C94 |
| C94 Breakout Board | Wiring/interface board that adds screw terminals, relays, spindle control, and safety features for the UC300ETH |
| DIN Rail Support for C94 | Mechanical support that mounts the C94 (with the UC300ETH on it) onto 35 mm DIN rail inside the control cabinet |
Important compatibility note
- This is a mounting support for the C94 breakout board. It does not fit the C76, the C25XP, or a bare UC300ETH.
- If your UC300ETH is mounted on a C94 (including the UC300ETH + C94 bundle), this is the only DIN rail support you need.
- Fits standard 35 mm top-hat (TS35) DIN rail. DIN rail is sold separately.
- The C94 and the UC300ETH are sold separately unless purchased as part of a bundle.
- This support does not replace the UC300ETH, C94, motor drivers, power supplies, relays, switches, or CNC control software.
Build a cleaner UC300ETH + C94 control cabinet
Add this DIN rail support when mounting the C94 inside a CNC control enclosure. It is a simple accessory, but it is the one that keeps the board and the controller riding on it secure, organized, and easy to service.
Teilen
